Filter
Top Products
SETUP
SDP-5
3-55
PWR – the power trigger output connector – is not configurable. It is activated when the
SDP-5 is activated, and deactivated when the SDP-5 is deactivated. The trigger output
connector labeled 1 can be configured for remote or program operation.
Default Possible
Parameter Setting Settings
REMOTE ONLY OFF ON, OFF
Program Operation N/A ON, OFF
All TRIGGER SETUP menu parameters – except the REMOTE ONLY
parameter – are considered program operation parameters.
REMOTE ONLY ON, OFF
Configures the trigger output connector labeled 1 for remote operation. When set to ON, this
connector is configured for remote operation. When the Zone 2 command bank is activated, it
can be activated and deactivated with the remote control Mode and buttons (2-14). The
SDP-5 ignores all other TRIGGER SETUP menu parameter settings. When set to OFF, the trigger
output connector labeled 1 is not configured for remote operation. It can be configured for
program operation. Refer to the next page for more information about configuring the trigger
output connector labeled 1 for program operation.
REMOTE ONLY
TRIGGER
SETUP
TRIGGER SETUP
Selecting the SETUP menu TRIGGER option opens the
TRIGGER SETUP menu shown at the right, which can
be used to configure the trigger output connector
labeled 1. The SDP-5 rear panel houses two 12V DC
trigger output connectors. The connector labeled
TRIGGER
SETUP
TRIGGER SETUP
REMOTE ONLY ON
DVD1 OFF
DVD2 OFF
SAT OFF
VCR OFF
TV OFF
CD OFF
TUNER OFF
AUX OFF
ZONE2 INPUTS OFF
L7 FILM ON
L7 TV ON
L7 MUSIC ON
L7 MUSIC SURR ON
%!PLII + THX ON
%!PLII MOVIE ON
%!PLII MUSIC ON
%!PRO LOGIC ON
dts neo:6 FILM ON
dts neo:6 MUSIC ON
NIGHTCLUB ON
CONCERT HALL ON
CHURCH ON
CATHEDRAL ON
PANORAMA ON
PARTY ON
2-CHANNEL OFF
MONO LOGIC ON
MONO SURROUND ON
MONO ON
5.1 L7 FILM ON
5.1 L7 TV ON
5.1 L7 MUSIC ON
5.1 THXI SurEX ON
5.1 THXI MUSIC ON
%! DIGITAL EX ON
5.1 2-CHANNEL OFF
5.1 MONO LOGIC ON
5.1 MONO SURR ON
5.1 MONO ON
DTS-ES L7 FILM ON
DTS-ES L7 MUSIC ON
DTS-ES THX ON
DTS THXI MUSIC ON
DTS-ES ON
DTS-ES 2-CHAN OFF
5.1a BYPASS ON
2CH BYPASS OFF
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
TRIGGER
REMOTE ONLY OFF
ON
OFF
* TRIGGER SETUP menu
listening mode names
are fixed, meaning
these names do not
change when certain
encoding is present.
For instance, the 5.1
THX SurEX listening
mode label appears
whether THX Ultra2,
THX Surround EX,
or no encoding is
engaged.