Filter
Top Products
Installing the Hardware 1-9
Chapter 1: Installing CD-
Writer Plus and Software
CAUTION: Make sure that you are attaching the cable correctly! You must
locate PIN-1 on each connector and attach the cable so that the edge with the
color stripe is aligned with PIN-1. If the cable is attached incorrectly, your
computer may not boot up.
PIN-1
The cable’s colored edge is aligned
with PIN-1 of the IDE controller.
colored stripe on
the data cable
PIN-1
The cable’s colored edge is aligned
with PIN-1 on the CD-Writer Plus
drive.
colored stripe on
the data cable