Filter
Top Products
Installing the Hardware 1-7
Chapter 1: Installing CD-
Writer Plus and Software
7. Insert the drive into the drive bay. Be careful not to dislodge any cables
inside your computer as you do this.
WARNING: The drive requires a secure fit. If there is a gap of 1/8 inch (3.2
mm) or more on either side of the drive, you will not be able to secure it. In this
case, obtain and attach “rails” from your computer manufacturer before
inserting the drive. (You may already have what you need from step 4.)
8. If there is not much room around the back of the CD-Writer Plus drive, it
may be better to wait until after step 13 to complete this step.
Secure the drive into the bay, using the screws included with your drive
or any M3x0.5x6mm metric screw.
The screws electrically ground the drive.
Use all four screws
2
3
4
1