Fostex CR500 Stereo Amplifier User Manual


 
88
CD-R/RW MASTER RECORDER CR500 (MENU mode: DISK UTILITY menu)
Rewriting the file system [Rewrite File Sys]
This menu item rewrites the file system. It is available only with a BWF formatted disc
(Note: This menu item is not available with CD-DA discs and finalized BWF discs). After you
edit a WAV file on the UDF file system (such as file name editing, file deletion and file
restoring), you have to rewrite the file system using this menu item.
<Note>:
If you attempt to eject a disc after making editing on the file system without rewrit-
ing, the popup screen as below left appears. Pressing the [ENTER/YES] key starts rewriting
the file system (the popup screen as below right appears). After completing rewriting, the
disc is ejected.
1) While the recorder is stopped, press the
[ENTER/YES] key.
The unit enters the MENU mode and the
MENU list screen as below is shown.
2) Use the [MENU] dial to highlight
"DISK UTILITY
" and press the [ENTER/YES]
key.
The display now shows the DISK UTILITY menu
screen. Initially, "Format " is highlighted.
If you press the [EXIT/NO] key instead of the [ENTER/YES] key when the popup screen above
left is shown, the disc is ejected without rewriting the file system. In this case, the editing
you made is cancelled and the system returns to the condition before editing.
4) Press the [ENTER/YES] key to rewrite the
system file.
The display shows the screen below while
executing. After rewriting completes, the
display shows the Home screen.
3) Use the [MENU] dial to highlight "Rewrite
File Sys
" and press the [ENTER/YES] key.
The display changes to show the
confirmation screen as below, where "Are
you sure?" flashes Pressing the [ENTER/YES]
key rewrites the file system. Pressing the
[EXIT/NO] key cancels rewriting.
<Notes>
If you carry out the operation of step
3) when you have not made any
editing after rewriting the file
system last time, the display shows
"No data changed!".
If you carry out the operation of step
3) when a CD-DA disc is set, the
display shows "Void!".
<Note>:
Each time you rewrite the system file using the "Rewrite File Sys" menu item, the
number of remaining recordable files decreases by one and the remaining disc space de-
creases. Therefore, we recommend rewriting the system file after you complete all file edit-
ing operations.
flashing