Filter
Top Products
31
CD-R/RW MASTER RECORDER CR500 (Names and functions)
• File name
Shows a track number and a name of the currently selected track (file).
• WAV file
A file name according to the setting of the "Default File Name" menu item of the
"SYS SETUP" menu in the MENU mode is shown.
Depending on the "Default File Name" setting, "DATE information", "Scene Name
+ Take number" or "Reel Number + File Number" is shown (see page 75).
• Audio track (CD-DA)
A track name written in the CD-TEXT format is shown. If no name is saved in the
CD-TEXT format, only the track number is shown (the file name field is blank).
File 1 (1 minute)
File 2 (1 minute)
File 3 (1 minute)
0m00s000ms
1m00s000ms
1m00s000ms
1m00s000ms
0m00s000ms
0m00s000ms
0m00s000ms
1m00s000ms
2m00s000ms
3m00s000ms
Total time indication example
Track time indication example
SINGLE PLAY mode
("-> SINGLE PLAY" is shown.)
PROGRAM PLAY mode
("-> PROGRAM PLAY" is shown.)
MEMORY PLAY mode
• Play mode
The currently selected play mode is shown. When the MEMORY PLAY mode is selected,
the screen looks differently.
You can select the desired play mode by pressing the [PLAY MODE/
PROGRAM SET
] key from
among "ALL PLAY", "SINGLE PLAY", "PROGRAM PLAY" and "MEMORY PLAY" (by de-
fault, ALL PLAY is selected). You can also select the desired play mode using the "Play
Mode" menu item of the "PLAY SETUP" menu in the MENU mode (see page 83).
ALL PLAY mode
("-> ALL PLAY" is shown.)
<Note>:
If no file is set in the play list, you cannot select the PROGRAM PLAY mode
("No Play List" pops up).
In the MEMORY PLAY mode, if no audio data is set, "-----" is shown in each memory
bank (1 through 10) and the [MEMORY] indicator flashes fast.