Filter
Top Products
87
CD-R/RW MASTER RECORDER CR500 (MENU mode: DISK UTILITY menu)
7) Use the [MENU] dial to highlight "Audio
format type" and press the [ENTER/YES]
key.
The currently selected format type (the
default is "CD-DA") flashes and you can now
select the format type.
You can select a format type from among
"CD-DA" and the various "BWF" types (see
the table below).
CD-DA (default) : 44.1kHz/16Bit
BWF (44.1/16) : 44.1kHz/16Bit
BWF (44.1/24) : 44.1kHz/24Bit
BWF (48/16) : 48kHz/16Bit
BWF (48/24) : 48kHz/24Bit
BWF (88.2/24) : 88.2kHz/24Bit
BWF (96/24) : 96kHz/24Bit
8) Use the [MENU] dial to select the desired
type and press the [ENTER/YES] key to
confirm your selection.
9) Use the [MENU] dial to highlight
"[EXECUTE]" and press the [ENTER/YES]
key. (To cancel formatting, highlight "[EXIT]"
instead of "[EXECUTE]".)
The display shows the "CAUTION" screen as
below, on which "Are you sure?" flashes.
To cancel formatting, press the [EXIT/NO]
key.
10) Press the [ENTER/YES] key to start
formatting the disc.
When you select any of the BWF types in
step 8) above, the unit erases data before
formatting the disc as shown in the screens
below. When you select "CD-DA" in step 8)
above, the unit only erases data.
<Note>:
To reformat a formatted disc
with the different format type, execute
the same procedure as above.
When formatting (or erasing) completes, the
display shows "Completed", while the unit
exits the MENU mode. The display returns
to the Home screen.
flashing