Filter
Top Products
82
CD-R/RW MASTER RECORDER CR500 (MENU mode: PLAY SETUP menu)
PLAY SETUP menu
In the PLAY SETUP menu, four menu items are available. The following table shows each
menu item name and its function, as well as the default setting.
Menu item
Play Mode
Repeat
Auto Play
Power On Play
Selects the play mode. You can also use the [PLAY MODE/
PROGRAM SET
] key on the panel to select the play mode (see
page 54).
Function
Selects on/off of the repeat mode. You can also use the [RE-
PEAT] key on the panel to select the play mode.
Selects whether the recorder automatically starts playback
after locating the song when you specify the desired song to
be played back using the numeric keys in the [MEMORY/
MEMORY SET
] key group and [CLEAR/+10] key.
Default
ALL
Off
On
Off
Selects whether the recorder automatically starts playback
when turning on the unit.
The basic procedure for using the "PLAY SETUP" menu is as described below.
1) While the recorder is stopped, press the [ENTER/YES] key.
The unit enters the MENU mode and the MENU list screen as below is shown.
2) Use the [MENU] dial to highlight "PLAY SETUP " and press the [ENTER/YES] key.
The display now shows the PLAY SETUP menu screen.
3) Use the [MENU] dial to select the desired menu item and press the [ENTER/YES] key.
The display now shows the first level screen of the selected menu item.
The current setting flashes and you can now make selection on the current level screen.
4) Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to
confirm the selection.
Basic procedure for using the "PLAY SETUP" menu