Filter
Top Products
30
CD-R/RW MASTER RECORDER CR500 (Names and functions)
Home screen (available in stop or playback mode)
When a formatted CD-R/RW disc is loaded and the unit is stopped or playing back, the
"Home screen" is shown. The screen example below shows the Home screen when a
recorded CD-R/RW disc is loaded.
On the Home screen, various information about the current setting and status is shown,
as described below.
Screen details
Time information
File name
Playback Fs/bit
Play mode
File (or track) number list
• Time information
While stopped or during playback, the current recorder position is shown in "m:s:ms".
By default, the disc elapsed time from the beginning of the disc is shown (TOTAL is
indicated on the top left of the screen).
You can select the time mode shown here by pressing the [DISPLAY/
CONTRAST
] key from
among the disc elapsed time, track elapsed time, total remaining time and track re-
maining time. Note that during recording, you cannot select the total remaining time
and track remaining time.
When selecting the remaining time, negative time value is shown (see the screen ex-
amples below).
Also the appropriate icon (
, , , or ) which shows transport status is lit.
The following shows a screen example of each of four time modes when the recorder is
at the beginning of the disc.
<Disc elapsed time>
Shows "0m 00s 000ms", indicating that
the recorder is at the beginning of the
disc.
<Track elapsed time>
Shows "0m 00s 000ms", indicating that
the recorder is at the beginning of track
01.
<Track remaining time>
Indicates that the track remaining time
(=total playing time of track 01) is "3m
56s 000ms".
<Total remaining time>
Indicates that the total remaining time
(=total playing time of tracks 01 through
06) is "23m 45s 670ms".