Filter
Top Products
61
CD-R/RW MASTER RECORDER CR500 (Playback/Locate)
Playback in the MEMORY PLAY mode
While the Home screen of the MEMORY PLAY mode is shown, pressing a numeric key in the
[MEMORY] key group instantly starts playback of audio data which is assigned to the correspond-
ing memory bank (instant start function).
In the MEMORY PLAY mode, you can starts playback of the selected song from the desired start
time and ends playback at the desired end time. To execute playback in the MEMORY PLAY mode,
you need to assign a song to at least one memory bank (see below).
Executing MEMORY PLAY (instant start)
<Note>:
In the MEMORY PLAY mode, unlike other modes, you cannot use the
repeat and auto play functions.
While the Home screen of the MEMORY PLAY mode as above is shown, pressing a
numeric key in the [MEMORY] key group instantly starts playback of audio data
which is set to the corresponding memory bank (instant start function). The fol-
lowing shows the example when the [3/DEF] key in the [MEMORY] key group is
pressed.
PQRS
0
symbol TUV WXYZ
8
2
5
space ABC DEF
CLEAR
1
4
7
MEMORY SET
MEMORY
GHI JKL MNO
9
3
6
+10
[MEMORY] key group
<Note>:
You can store memory play data for 100 discs to the CR500 system memory.
If you attempt to store a memory play data for a new disc when memory play data
for 100 discs are already stored, the CR500 deletes the oldest memory play data
and stores the new memory play data. However, if you reload a disc whose memory
play data has been deleted as in the case above, its memory play data is automati-
cally stored as the newest memory play data.
<Note>:
By executing the "Sys Initial Memory" item of the "SYS SETUP" menu in the
MENU mode, all memory play data are reset (see page 80).
<Home screen of the MEMORY PLAY mode>