Filter
Top Products
41
CD-R/RW MASTER RECORDER CR500 (Recording)
Preparation for recording
Connecting a sound source
Before making recording of analog or digital audio, you must make preparation for recording as
described below.
The following description assumes that the CR500 is turned on and a BWF formatted or CD-DA
formatted blank CD-R/RW disc is set to the disc tray. To record WAV files, use a BWF formatted
CD-R/RW disc. To record audio CD tracks, use a CD-DA formatted CD-R/RW disc.
AC IN
CAUTION
AVIS:
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
UNBALANCED [-10dBV] BALANCED [+4dBu]
1:GND 2:HOT 3:COLD
RL RL
BALANCED [+4dBu]
DIGITAL
OUTPUTINPUT
L
R
R
L
ANALOG INPUT ANALOG OUTPUT
AC IN
GPI
Analog audio device
Digital audio device
<Home screen of a BWF (48/24) formatted disc>
<Home screen of a CD-DA formatted disc>
<BWF formatted CD-R/RW disc>
<CD-DA formatted CD-R/RW disc>
The following description is assumed that the Home screen as shown below appears on the
display. The Home screen looks slightly different depending on the format type. The screen
examples below show the Home screens for a BWF (48/24) formatted and CD-DA formatted
discs.
To record an analog audio signal, connect a sound source to the [ANALOG INPUT] (bal-
anced or unbalanced) connectors. To record a digital audio signal, connect a sound source
to the [DIGITAL INPUT] connector.
EXIT/NO
SHIFT
PUSH
MENU/ENTER/YES
SKIP/CURSOR
STOP/HOME
RECORD PLAY
REWIND
F FWD
PQRS
REC END
ABS 0
0
symbol TUV WXYZ
8
2
5
CONTRAST
FILE SEL
space ABC DEF
EDIT TIME
CLEAR
1
4
7
MEMORY SET
MEMORY
GHI JKL MNO
9
3
6
DISPLAY
LOCATE
+10
DIR SEL
REC RDY
ACCESS
PLAY MODE
PROGRAM SET
REPEAT
OPEN/CLOSE
RL
MAX
MIN
MAX
MIN
MAX
MIN
PHONES
INPUT LEVEL
(KYBD ONLY)
USB
POWER
<Note>:
If you make connection to both the analog balanced (XLR) and unbalanced (RCA)
input connectors, the unbalanced input takes priority and the balanced input is dis-
abled.