Filter
Top Products
70
CD-R/RW MASTER RECORDER CR500 (Playback/Locate)
Locating a point by entering a time
By entering a time, you can immediately locate the corresponding point
Depending on the current time mode, you can specify the point by the disc elapsed time
or track elapsed time.
1) While the recorder is stopped or during playback, press the [SHIFT] key to turn on the Shift
mode, and press the [LOCATE/
EDIT TIME
] key.
The current time is captured and the popup screen for editing time is shown.
2) Use the [MENU] dial (or the numeric keys) to enter the desired time.
You can use the cursor position by using the [SKIP/CURSOR ] keys.
You can reset the time on the screen to "000m 00s 000ms" by pressing the [CLEAR/+10]
key. You can enter a time within the range between "000m 00s 000ms" and "999m 59s
999ms".
flashing
<Note>:
The time information area on the screen shows the captured time in the
current time mode (the disc elapsed time or track elapsed time).
<Note>:
If you enter an illegal time and attempt to locate the corresponding
point, the display shows "Out of Zone!" and the operation is rejected. Enter a
legal value.
3) After entering the time, press the [LOCATE/
EDIT TIME
] key.
The recorder immediately locates the corresponding point and stops.
<Note>:
When you press the [LOCATE/
EDIT TIME
] key in step 3) above, the time is
stored to the [LOCATE/
EDIT TIME
] key. Therefore, next time you press the [LO-
CATE/
EDIT TIME
] key, you can locate the same point. The stored time is effective
until you edit the time by the steps above.
<Note>:
If you have never executed the locate function using the [LOCATE/
EDIT TIME
] key, pressing the [LOCATE/
EDIT TIME
] key locates the beginning of the
disc.
EXIT/NO
SHIFT
PUSH
MENU/ENTER/YES
SKIP/CURSOR
STOP/HOME
RECORD PLAY
REWIND
F FWD
PQRS
REC END
ABS 0
0
symbol TUV WXYZ
8
2
5
CONTRAST
FILE SEL
space ABC DEF
EDIT TIME
CLEAR
1
4
7
MEMORY SET
MEMORY
GHI JKL MNO
9
3
6
DISPLAY
LOCATE
+10
DIR SEL
REC RDY
ACCESS
PLAY MODE
PROGRAM SET
REPEAT
OPEN/CLOSE
RL
MAX
MIN
MAX
MIN
MAX
MIN
PHONES
INPUT LEVEL
(KYBD ONLY)
USB
POWER
1
1,3
2
2
2
2