Filter
Top Products
64
CD-R/RW MASTER RECORDER CR500 (Playback/Locate)
3) Edit the memory name.
Use the [SKIP/CURSOR ] keys to move
the cursor point (flashing point).
Use the numeric ([MEMORY]) keys or [MENU]
dial to select the desired character of the
flashing point.
Pressing the [CLEAR/+10] key deletes the
immediate right character of the flashing
point.
Therefore, by pressing the [CLEAR/+10] key
repeatedly when the leftmost character
flashes, you can delete the whole current
name.
4) After entering the desired name, press the
[ENTER/YES] key.
The old name is replaced with the new name.
5) After editing, move the cursor to "<SAVE>"
and press the [ENTER/YES] key.
The display returns to the Home screen of
the MEMORY PLAY mode.
Editing the start time/end time by entering time data
2) Move the cursor to "[START]" or "[END]"
and press the [ENTER/YES] key.
To edit the playback start time, select
"[START]".
To edit the playback end time, select "[END]".
By default, the selected song is played back from the beginning to the end of the file when
MEMORY PLAY is executed by pressing a numeric key.
You can, however, edit the playback start time and end time by entering desired time data (or
using digital scrub function, as described on the next page).
The following description assumes that one or more memory banks have audio data and the
display shows the Home screen of the MEMORY PLAY mode.
1) Press the [SHIFT] key to turn on the Shift
mode, and specify the memory bank whose
data you want to edit by pressing the corre
sponding numeric key in the [MEMORY] key
group.
For example, if you press the [1/space] key,
the display changes to show the setting
screen for memory bank 1 (MEMORY 1).
<Note>:
Do not forget to execute the
save operation above. Otherwise, the
editing is cancelled.
Editing a memory name
2) Move the cursor to "[NAME]" and press the
[ENTER/YES] key.
The rightmost digit of the current memory
name starts flashing and you can now edit
the name.
By default, the original file name is set as the memory name in a memory bank. You can edit this
name. The following description assumes that at lease one memory bank has audio data and the
display shows the Home screen of the MEMORY PLAY mode.
1) Press the [SHIFT] key to turn on the Shift
mode, and specify the memory bank you
want to edit by pressing the corresponding
numeric key in the [MEMORY] key group.
For example, if you press the [1/space] key,
the display changes to show the setting
screen for memory bank 1 (MEMORY 1).
flashing