Filter
Top Products
50
CD-R/RW MASTER RECORDER CR500 (Recording)
When a disc contains more than one song ("audio file" on a BWF formatted disc or "audio track"
on a CD-DA disc), you can select a desired song to be played back by any of the following three
methods.
<Method 2>: Using the [MEMORY/
MEMORY SET
] key group
By specifying the file (track) number of a song using a key in the [MEMORY/
MEMORY SET
] key
group, the recorder locates the beginning of the song. To specify a song whose number is
two-digit, use the [CLEAR/+10] key to specify the tens digit and then press an appropriate
key among the [0] through [9] keys (see the entry examples below).
SKIP/CURSOR
PQRS
0
symbol TUV WXYZ
8
2
5
space ABC DEF
CLEAR
1
4
7
MEMORY SET
MEMORY
GHI JKL MNO
9
3
6
+10
<Method 1>: Using the [SKIP/CURSOR ] keys
If you press the [SKIP/CURSOR ] or [SKIP/CURSOR ] key, the following popup screen
appears, and the recorder skips to the beginning of the current/previous or next song and
stops. You can locate the desired track by pressing the appropriate key as many times as
required.
How to use the [CLEAR/+10] key
If you press the [CLEAR/+10] key once, the popup screen below left appears. High-
lighted "1-" indicates the tens digit is "1". If you press the [CLEAR/+10] key again,
highlighted "1-" changes to "2-", indicating that the tens digit is "2". That is, pressing
the [CLEAR/+10] key increments the tens digit number.
Selecting a song to be played back
[CLEAR/+10] key
[MEMORY/
MEMORY SET
] key group
For example, to select track 15, press the [CLEAR/+10] key once, followed by the [5/
JKL] key in the [MEMORY/
MEMORY SET
] key group. To select track 24, press the [CLEAR/
+10] key twice, followed by the [4/GHI] key in the [MEMORY/
MEMORY SET
] key group.
<When you press the [CLEAR/+10] key once>
<When you press the [CLEAR/+10] key twice>
<Note>:
You can execute the operation above while stopped or during playback. The
recorder automatically starts playback of the specified song. If you enable the repeat
function (by using the [REPEAT] key or the "PLAY SETUP" menu in the MENU mode), the
recorder repeats playback.
<Note>:
You can execute the operation above while stopped or during playback. If you
execute the operation during playback, the recorder automatically starts playback after
locating the specified song. If you enable the repeat function (by using the [REPEAT] key
or the "PLAY SETUP" menu in the MENU mode), the recorder repeats playback.