Filter
Top Products
69
CD-R/RW MASTER RECORDER CR500 (Playback/Locate)
Skipping between audio files (or audio tracks)
When more than one song is recorded on a CD-R/RW disc, you can immediately skip to
the beginning of a desired song.
While the recorder is stopped, pressing the [SKIP/CURSOR
] or [SKIP/CURSOR ]
key skips to the beginning of the next or current/previous song. Therefore, you can skip
to the desired song by pressing the appropriate [SKIP/CURSOR
] key as many
times as required.
Locating the specific ABS time (Locate ABS 0/Locate REC END)
Pressing the [REWIND] key while holding down the [STOP/HOME] key immediately lo-
cates the beginning of the current disc ("Locate ABS 0" function).
Pressing the [F FWD] key while holding down the [STOP/HOME] key immediately locates
the record end position of the current disc ("Locate REC END" function).
<Note>:
With the "Locate ABS 0" and "Locate REC END" functions, you cannot select
an audio file (or audio track) individually. To select a file (or track) individually, use
the [SKIP/CURSOR
] key as described above or use other methods describes
in "Selecting a song to be played back" on page 51.
The following shows how the display changes by pressing the [SKIP/CURSOR ]
key once to skip to the second song while the first song is selected.
<Note>:
The skip function above is always available regardless of the play mode.
<Note>:
If you press the [SKIP/CURSOR ] or [ ] key during playback, play-
back automatically starts from the beginning of the selected song.
SKIP/CURSOR
[SKIP/CURSOR ] key