Filter
Top Products
8. Image Menu
Enabling/disabling the filmmode detection
1. Press MENU to activate the menu bar.
2. Press → to select the Image item. (image 8-32)
3. Press ↓ to pull down the Image menu.
4. Use ↑ or ↓ to select Filmmode detection.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to enable or disable the Filmmode detection.
7. Press ENTER.
A white bullet shows the active setting.
Image 8-32
8.9 Blanking
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on the screen and to
hide or black out unwanted information (or noise). A ’0’ indicates no blanking.
Which blanking adjustments are available ?
• top blanking
• bottom blanking
• right blanking
• left blanking
80
R5976817 RLM H5 02/06/2006