Filter
Top Products
13. Display Setup
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select ScenergiX.
5. Press → to select the ScenergiX item.
6. Use ↑ or ↓ to select Border.
7. Press ENTER to select.
A dialog box will be displayed. The actual scenergix border will be displayed.
8. Use ↑ or ↓ to select the desired adjustment.
Image 13-16
Adjusting with the arrow keys.
1. When on an adjustment, use the → or ← key to move the border line to the desired position
.
The border line will move in the desired direction and the light output in the overlap area will be adapted to. (image 13-17)
Set first the width of the first projector and repeat for the second one. (image 13-18, image 13-19)
Image 13-17
Width selections
R5976817 RLM H5 02/06/2006 127