Filter
Top Products
10. Signal menu
4. Use ↑ or ↓ to select Output frame rate.
5. Press → to pull down the menu.
6. Use ↑ or ↓ to select the desired frame rate.
The following choices are possible:
- synchronous : the output follows the input frame rate.
- 50 Hz : output is always displayed with a frame rate of 50 Hz
- 60 Hz : output is always displayed with a frame rate of 60 Hz
7. Press ENTER.
Image 10-3
10.4 Background
Purpose
If there is no signal connected to the projector, the background will be a black or a blue screen depending on the background settings.
How to change the background ?
1. Press MENU to activate the Tool bar.
2. Press → to select the Signal item. (image 10-4)
3. Press ↓ to pull down the Signal menu.
4. Use ↑ or ↓ to select Background.
5. Press → to pull down the menu.
6. Use ↑ or ↓ to select the desired background.
7. Press ENTER.
Image 10-4
When there is no signal connected, the projector will also star
t its standby timer countdown (if enabled) and
shuts down after the predetermined time.
104 R5976817 RLM H5 02/06/2006