Barco R9010300 Home Theater System User Manual


 
8. Image Menu
How to change the Phase ?
1. Press MENU to activate the menu bar. (image 8-10)
2. Press to select the Image item.
3. Press to pull down the Image menu.
4. Use or to select settings.
5. Press to pull down the menu.
6. Use or to select Phase.
7. Press ENTER .
A slider box appears.
8. Use or to change the Phase and refine the jitter.
Or,
click in the input box and enter the desired value with the numeric keys.
Note: Don’t mix up with wron g number of t otal pixels. If the jitter doesn’t disappe ar with the phase adjustment, check the total
number of pixels. (Best image = pixel on pixel off pattern. For example: shut down screen of a PC)
Image 8-10
8.2.8 Noise reduction
About Noise reduction
Reduces noise and pixel jitter in all video sources.
How to change the Noise reduction ?
1. Press MENU to activate the menu bar. (image 8-11)
2. Press to select the Image item.
3. Press to pull down the Image menu.
4. Use or to select settings.
5. Press to pull down the menu.
6. Use or to select Noise reduction.
7. Press ENTER .
A slider box appears
8. Use or to change the noise level.
The higher the value, the higher the noise reduction.
Or,
click in the input box and enter the desired value with the numeric keys.
68
R5976817 RLM H5 02/06/2006