Agilent Technologies Agilent 35670A Stereo System User Manual


 
AGILENT 35670A
Supplemental Operator’s Guide
62
Measuring Time Averaged Spectrums with External Triggering
Now that the external trigger has been set up, the analyzer is ready to measure a
signal with time averaging as follows:
Connect the external trigger signal to the EXT TRIG port on the back of
the AGILENT 35670A.
Turn on the AGILENT 35670A, or
Press the green [Preset] hardkey
Press the yellow [Pause/Cont] hardkey if desired.
Set up measurement parameters
Press the [Freq] hardkey
Enter 800 and then press the [Hz] softkey (F2)
Press the [Avg] hardkey.
Press the [AVERAGE TYPE] softkey (F3).
Press the [TIME] softkey (F3).
Turn on averaging by pressing the [AVERAGE ON OFF] softkey (F1)
until ON is highlighted.
Press the yellow [Start] hardkey.