Filter
Top Products
AGILENT 35670A
Supplemental Operator’s Guide
49
• Press the [Active Trace] hardkey again.
• Press the [D] softkey (F2).
• Press the [Trace Coord] hardkey.
• Press the [PHASE] softkey (F4).
Start measurement
• Press the yellow [Start] hardkey.
The AGILENT 35670A will now measure motion of Channel 1 and 2 and show the
results in Traces A and B. The difference in motion between Channel 1 and Channel
2 is shown in Trace C. The phase angle between channels is shown in Trace D.
Disp Frmat
Date: 01-01-04 Time: 08:35:00 AM
0Hz 1.6kHzAVG: 10
X:468 Hz Y:15.8415 mmilpp
X:468 Hz Y:-170.713 deg
0Hz 1.6kHz
X:468 Hz Y:24.6051 mmilpp
0Hz 1.6kHzAVG: 10
A: CH1 MOTION
B: CH2 MOTION
X:468 Hz Y:39.2406 mmilpp
100
milpp
10
umilpp
LogMag
1
milpp
10
umilpp
LogMag
C: DIFFERENCE
D: PHASE DIFF
180
deg
-180
deg
Phase
100
milpp
10
umilpp
LogMag
0Hz 1.6kHzAVG: 10