Filter
Top Products
AGILENT 35670A
Supplemental Operator’s Guide
16
• Press the [Meas Data] hardkey.
• Press the [CHANNEL 1 2 34] softkey (F1) until 2 is highlighted.
• Press the [Scale] hardkey.
• Toggle the [AUTOSCALE ON OFF] softkey (F1) until ON is highlighted.
Note: many of these keystrokes are not necessary if performed in the given order
because the analyzer defaults to many of these settings.
To acquire dual channel spectra,
• Press the yellow [Start] hardkey.
Meas Data
[FFT]
A: CH1 Pwr Spec B: CH2 Pwr Spec
C: CH1 Time D: CH2 Time
Date: 10-02-96 Time: 08:49:00 PM
X:60 Hz Y:80.4887 mVrms
0Hz 800Hz
A: CH1 Pwr Spec X:60 Hz Y:147.382 mVrms
1
Vrms
1
uVrms
LogMag
6
decades
B: CH2 Pwr Spec
1
Vrms
100
uVrms
LogMag
4
decades
0Hz 800Hz
Using Markers with Dual Channel Measurements
Each trace has independent marker control. All functions available for a single
marker are possible with both markers. To set up individual, independent markers
on each channel, follow these steps:
• Press the [Active Trace] hardkey.
• Press the [A] softkey (F1).
• Press the [Marker] hardkey.
• Toggle the [MARKER ON OFF] softkey (F1) until ON is highlighted.