Filter
Top Products
AGILENT 35670A
Supplemental Operator’s Guide
24
• Press the [Active Trace] hardkey.
• Press the [ABCD] softkey (F7).
• Press the [Scale] hardkey.
• Toggle the [AUTOSCALE ON OFF] softkey (F1) until ON is highlighted..
• Press the [Active Trace] hardkey.
• Press the [A] softkey (F1).
The default QUAD display shows Channel 1 power spectrum in Trace A, Channel 2
power spectrum in Trace B, Channel 1 time in Trace C, and Channel 2 time in Trace
D.
Individual markers can be used on each trace, or peak tracking and coupled markers
can be used as described for dual traces.
If averaging is applied to the power spectrum measurements, then the QUAD display
will show the averaged power spectra in Trace A and B, and the previously acquired
time traces in Trace C and D.
Scale Trace: A Ref Lvl: 1
Per Div: 5 Ref Pos: Top
Date: 10-02-96 Time: 08:54:00 PM
0Hz 800HzAVG: 10
X:60 Hz Y:88.5405 mVrms
X:14.6484 ms Y:279.515 mV
0s 499.5117ms
X:14.6484 ms Y:427.266 mV
0Hz 800HzAVG: 10
A: CH1 Pwr Spec
B: CH2 Pwr Spec
X:60 Hz Y:172.071 mVrms
1
Vrms
10
uVrms
LogMag
100
mVrms
10
uVrms
LogMag
C: CH1 Time
D: CH2 Time
500
mV
-500
mV
Real
500
mV
-500
mV
Real
0s 499.5117ms