Agilent Technologies Agilent 35670A Stereo System User Manual


 
AGILENT 35670A
Supplemental Operator’s Guide
1
Section 1 : Turning On the AGILENT 35670A
The entire turn-on procedure for the AGILENT 35670A takes 40 seconds. In
that time the analyzer completes a hardware self-test, boots its operating system,
completes a front end self-calibration and autoranges all input channels. The
default measurement state of the analyzer is a two-channel FFT measurement
with a span of 51.2 kHz, front ends autoranging, input low floating, and DC
coupled, averaging OFF and with a power spectrum display.
TIME
CAPTURE
REF CHANS
1
1,3
CHANNELS
1
2
4
HISTOGRAM
/ TIME
CORRELATN
ANALYSIS
SWEPT
SINE
ORDER
ANALYSIS
OCTAVE
ANALYSIS
FFT
ANALYSIS
A
: CH1 Pwr Spec X:0 Hz Y:40.9385 uVrms
0Hz 51.2kHz
10
mVrms
10
nVrms
LogMag
6
decades
Typical Display After Turn-on Sequence