Filter
Top Products
9–SD Card Management
TASCAM DP-004 85
(¥) key to open the
CARD
menu screen.
3 Turn the DATA wheel to select
FAT REFORMAT
, and
press the F4 (¥) key.
A pop-up message warning that all data on the
FAT partition will be erased appears.
4 Press the F3 (
YES
) key to reformat the FAT partition.
When reformatting finishes the
•
CARD
menu screen
reopens.
To cancel reformatting, press the
•
F4 (
NO
) key instead
of the F3 (
YES
) key.
Initializing SD cards
If you want to use an SD card that was used with
this unit, we recommend that you initialize it.
When you initialize an SD card, the entire card is
formatted as FAT32.
1 With the transport stopped and the Home Screen
open, press the MENU key to open the
MENU
screen.
2 Turn the DATA wheel to select
CARD
, and press the F4
(¥) key to open the CARD menu screen.
3 Turn the DATA wheel to select the
SD INITIALIZE
item and press the F4 (¥) key.
A pop-up message warning that all data on the
card will be erased appears.
4 Press the F3 (
YES
) key to initialize the entire card
and format it as FAT32.
To cancel initialization, press the
•
F4 (
NO
) key instead
of the F3 (
YES
) key.
CAUTION
If you want to use the card with a DP-004 again you
will need to format it (see “Formatting SD cards” on
page 38).