Filter
Top Products
60 TASCAM DP-004
6–Basic Recording
track. Use the track LEVEL knob and the MASTER
LEVEL knob to adjust the playback level. Use the
VOLUME dial or the volume on your monitoring
system to adjust the final monitoring volume.
NOTE
Track PAN and LEVEL knobs control the playback •
output signal on already recorded tracks. They do not
control the input signals.
Use the PAN knobs, to set the positions of each track •
signal between the left and right speakers. There is an
indent at the center positions of the PAN knobs.
If you are not satisfied with the recorded sound, •
follow the procedures above again from the
beginning.
Press the •
Ô/
keys to rewind/fast forward (like
a tape recorder). Press and hold these keys to increase
the rewind/fast forward speed. Press the stop (ª) key
to stop (like a tape recorder).
Overdubbing
Recording a new sound on a different track in time
with the playback signal of the already recorded
track is called overdubbing. In other words,
recording after the rst recording is overdubbing.
This is a basic function of multitrack recording.