Filter
Top Products
6–Basic Recording
TASCAM DP-004 59
For example, if you press the REC keys for track 1,
track 2 and track 3 in that order, track 1, which
was pressed first, will no longer be in record
standby, but track 2 and track 3, which were
pressed afterwards, will be in record standby.
2 Set the recording level. Turn the (INPUT A or INPUT
B) LEVEL knob to adjust the input level of the input
channel. Watch the display meters and the OL
indicator above and to the left of the LEVEL knob
while setting the level suitably. At the same time,
confirm that sound heard from the headphones is
not distorted.
NOTE
The meter for the track that the input signal is assigned
to moves simultaneously with the corresponding input
meter (A or B).
OL indicator
The OL indicator lights if the input is too loud. If
the OL indicator stays lit even when you lower the
LEVEL knob, lower the output level on the signal
source connected to the input.
Overload
warning bar
3 Press the playback (Á) key while pressing and
holding the record (–) key. Recording starts and
the record (–) key indicator lights red. The track
REC indicator changes from blinking to lit.
4 Press the stop (ª) key to stop recording.
5 To return to the starting point of the recording,
press the key while pressing and holding the
stop (ª) key. (This is the Last Recording Point
(LRP) function.)
To go to the beginning of the song (00:00:00:00),
press the Ô key while pressing and holding the
stop (ª) key. (This is the Return To Zero (RTZ)
function)
6 Press the playback (Á) key to play the recorded