Filter
Top Products
58 TASCAM DP-004
6–Basic Recording
1 Press ASSIGN to open the
INPUT ASSIGN
screen.
As shown above, the input channel that is the
recording source for each track (1–4) is shown.
In the initial setting, INPUT A is assigned as the
recording source for tracks 1 and 3, and INPUT B is
assigned as the recording source for tracks 2 and 4.
2 Use the F3 (§) and F4 (¶) keys to select a track to
change its current input channel.
3 Turn the DATA wheel to set the input to
IN A
or
IN B
.
4 When finished making settings, press the HOME
key to return to the Home Screen.
Making the first recording
Before following recording procedures below,
conrm that the source that you want to record is
connected, and that the input channel is assigned a
recording source for a track. Monitoring headphones
should also be connected.
1 Press the REC key of the track to record on. The
REC indicator blinks red (that status is called
“record standby”). A maximum of two tracks can
be recorded simultaneously. If you press a different
REC key when the REC indicators of two tracks are
already blinking, the track that was put into record
standby first will become inactive and the REC
indicator will turn off.