Filter
Top Products
72 TASCAM DP-004
7–Recorder Functions
2 Turn the DATA wheel to change the value above
the cursor. When adjusting, the value will carry
over automatically when it reaches the highest or
lowest value in a field. For example, when turning
the DATA wheel to increase the value in the seconds
field, the number will change from
59
to
0
and
the minutes value will increase by one. The time
display blinks when using the DATA wheel. The
blinking stops about two seconds after moving to
the new position.
3 Press the F1 (
DIGIT
) key to move to a different
time division and turn the DATA wheel to change
the value.
4 After setting the desired time value, press the
playback (Á) key to start playback from that
position.
RTZ and LRP
Use simple key operations to return to the top of a
song or to the position where recording last started.
Return To Zero (song beginning at 00:00:00:00)
Press the Ô key while pressing and holding the
stop (ª) key.
Last Recording Position (the position recording
last started)
Press the key while pressing and holding the
stop (ª) key.
This function is useful when you want to record the
same passage again.
TIP
RTZ and LRP below the Ô and keys are abbre-
viations for Return To Zero and Last Recording Position,
respectively.