Tascam DP-004 Stereo Receiver User Manual


 
9–SD Card Management
TASCAM DP-004 83
Card capacity and partition size
Card capacity FAT partition size MTR partition size
32 GB 4 GB 2 GB, 4 GB, 8 GB or
16 GB
16 GB 4 GB 2 GB, 4 GB or 8 GB
8 GB 2 GB 2 GB or 4 GB
4 GB 2 GB 2 GB fixed
2 GB 1 GB 1 GB fixed
1 GB 512 MB 512MB fixed
512 MB 256 MB 256MB fixed
4 If the card capacity is 8 GB or more, turn the DATA
wheel to select the MTR partition size, and press
the F2 (
EXEC
) key. A message warning that all songs
will be erased appears.
5 Press the F3 (
YES
) key to format the card.
For example, if you format a 16 GB card with 4GB
MTR partitions, 12 GB are left for MTR partitions
after 4 GB is used for the FAT partition. Three
partitions are created. Two are 4 GB and the last one
is 3 GB. (Since 1GB is actually 1024 MB, the total
size of the partitions does not always match the card
size.)
When formatting finishes the
CA R D
menu screen
reopens.
After formatting, one song is automatically created
in each MTR partition.
To cancel formatting, press the
F4 (
NO
) key instead of
the F3 (
YES
) key.
Reformatting MTR partitions
You can reformat an MTR partition if you want. Use
this function when you just want to format a specic
partition without changing its size.
CAUTION
You cannot undo this operation! All the data on the
selected partition will be erased, so be certain that you
will not lose anything important when reformatting.
1 When the transport is stopped and the Home
Screen is open, press the MENU key to open the
MENU
screen.
2 Use the DATA wheel to select
CARD
, and press the F4
(¥) key to open the
CARD
menu screen.
3 Turn the DATA wheel to select
REFORMAT
.