6–Basic Recording
TASCAM DP-004 67
event list starts at the bottom with event number “
0
”
(
-START UP-
). The top event is the most recent and
has “
*
” next to it.
All events that occurred after a selected event can
be undone at once. This operation is called “multi-
undo” because it allows you to undo multiple events
and return to an earlier state.
2 Turn the DATA wheel to select the event that you
want to return to (all events after the selected event
will be undone).
3 Press the F2 (
EXEC
) key to execute the multi-undo
and restore the song state to just after the selected
event was conducted. In this state, the UN/REDO
indicator lights.
The unit has been returned to a previous state, but
the event information undone through the above
operation is not erased. On the
HISTORY
screen,
a
*
appears next to the current event after undoing.
If you make a new recording or new edits after
using multi-undo (UN/REDO indicator lit), the event
history after the current event is cleared and the
last operation conducted becomes the most recent
event.
NOTE
When the HISTORY screen is open, the UN/REDO key
does not function, so single undo and redo cannot be
used.
CAUTION
When undo has been used and there are one or •
more undone operations, the UN/REDO indicator
lights. If there are no undone operations, the UN/
REDO indicator does not light. When the UN/REDO
indicator is lit (because there are undone events) if
you make a new recording or conduct new editing,
the last operation conducted becomes the most
recent event, and you will no longer be able to
redo previously undone operations.
When saving a song, a maximum of 500 items can •
be saved in the operation history as song data. If
the operation history exceeds 500 items, the oldest
events in the history are erased when the song is
saved. Erased events cannot be restored.
When the power is turned OFF the operation •
history is completely erased. The operation history
is not restored when the power is turned ON
again.