Filter
Top Products
70 TASCAM DP-004
7–Recorder Functions
Can be
overwritten
Can be
overwritten
Source tracks are erased when they are bounce
destinations. (In the illustration above the drum parts
are overwritten by the stereo mix). However, you
can use the unit’s (undo) function to return to the
previous state if you make a mistake (see “Undoing
the last operation (single undo)” on page 66).
Using the bounce function
1 Press REC MODE to open the
RECORDER MODE
screen.
2 Turn the DATA wheel to select
BOUNCE
.
3 Press the F4 (
EXEC
) key to put the unit in bounce
mode and return to the Home Screen.
4 Press the REC keys for the bounce destination
tracks (the indicators light).
For a stereo bounce, press the REC keys for tracks
1 and 2 or tracks 3 and 4. For a mono bounce
(bouncing the mix to a single track) press the REC
key for any one track.
5 Adjust the LEVEL and PAN knobs for the bounce
source tracks.
For mono bounces all sounds will be panned all