2–Quick Start Guides
TASCAM DP-004 23
3 Turn the DATA wheel to set the input to
IN B
.
NOTE
By default, INPUT B is set as the recording source for
tracks 2 and 4, so you do not need to change the input if
you want to record the vocal on track 4.
4 Press the HOME key to return to the Home Screen.
5 Press the TRACK 3 REC key. The key blinks showing
that the track is in record standby.
6 Use the INPUT B channel LEVEL knob to adjust the
mic input level. Set the LEVEL knob so that the
INPUT B channel OL indicator does not light even
when the loudest sound to be recorded is input.
NOTE
If the OL indicator continues to light even when the
LEVEL knob is turned down, the mic signal itself is
too loud. In this case, if the input setting is
INT.MIC
B-High
, change it to
INT.MIC B-Mid
or
INT.MIC B-Low
. If
the input setting is
INT.MIC B-Mid
, change it to
INT.
MIC B-Low
. If the OL indicator continues to light even
when set to
INT.MIC B-Low
, move the sound source
away from the mic or lower the volume at the sound
source.
The input level of built-in MIC B is shown by the
B
meter on the screen.