Filter
Top Products
24 TASCAM DP-004
2–Quick Start Guides
Raise the MASTER LEVEL knob and VOLUME dial as
necessary to hear the mic input through the vocals.
CAUTION
Always monitor through headphones when using a
mic. If you monitor through speakers, feedback could
occur and the recorded sound might not be right.
NOTE
When the input source is one of the built-in mics, the
input cannot be heard when the REC indicator is not lit.
7 Press the Ô key while pressing and holding the
stop (ª) key to return to the beginning of the song.
Press the playback (Á) key to play the recorded
guitar tracks while you practice the vocal part.
Both guitar parts and your singing can be heard
through the headphones.
8 Use the track LEVEL knobs, MASTER LEVEL knob and
VOLUME dial to adjust the output volume and the
balance between the tracks.
9 Return to the start of the track again and press the
playback (Á) key while pressing and holding the
record (–) key to start recording. The TRACK 3 REC
key stops blinking and stays lit constantly.
You are recording again. Sing!
10 When you are finished, press the stop (ª) key to
stop recording.
11 Press the TRACK 3 REC key again. Its light turns off.
Mixing the tracks
After you nish recording, the next step is to make
a stereo mix. This unit allows you to make a stereo
mix for every song.
1 Use the LEVEL knobs for tracks 1, 2 and 3, to adjust
the levels of the tracks and the balance between
them. Use the MASTER LEVEL knob to adjust the
overall level.