Sony STR-LV700R Stereo System User Manual


 
Appendix
masterpage:Right
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB11APP_STR-LV700-CEL.fm]
87
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
Safety
Should any solid object or liquid fall onto the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
Power sources
Before operating the unit, check that the operating
voltage is identical to your local power supply. The
operating voltage is indicated on the nameplate at the
rear of the receiver.
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the power
outlet, even if the unit itself has been turned off.
If you are not going to use the receiver for a
prolonged period, be sure to disconnect the receiver
from the power outlet. To disconnect the AC power
cord, grasp the plug itself; never pull the cord.
The AC power cord must be replaced only at a
qualified servicing centre.
Heat buildup
Although the unit heats up during operation, this is not
a malfunction. It is also not a malfunction for the upper
left corner of the unit to heat up while the power is on.
If you continuously use this unit at a high volume, the
cabinet temperature of the top, side, and bottom rises
considerably. To avoid burning yourself, do not touch
the cabinet.
Positioning
Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
Do not place the receiver near heat sources, or in a
location subject to direct sunlight, excessive dust, or
mechanical shock.
Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
Use caution when placing the unit or speakers on
surfaces that have been specially treated (with wax,
oil, polish, etc.) as staining or discoloration of the
surface may result.
Operation
Before connecting other components, be sure to turn
off and unplug the receiver.
Cleaning
Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent such as alcohol or benzine.
If you have any questions or problems concerning your
receiver, consult your nearest Sony dealer.
Precautions