Filter
Top Products
masterpage:Left
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB07_STR-LV700-CEL.fm]
38
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
Manual tuning
You can tune in stations in 50 kHz steps for the
FM band and 9 kHz steps for the AM band.
1 Press the FM or AM button repeatedly
to select the FM or AM band.
You can also use INPUT SELECTOR on
the system. The last station received is
tuned in.
2 Press the TUNING MODE button
repeatedly to select MANUAL T..
3 Press the TUNING + or TUNING –
button repeatedly to tune in the station
that you want.
Press the TUNING + button to change the
frequency from low to high.
Press the TUNING – button to change the
frequency from high to low.
Tip
If STEREO flashes on the display and the FM stereo
reception is poor, press the FM MODE button to
improve the sound. You will not be able to enjoy the
stereo effect, but the sound will be less distorted.
Note
If STEREO does not appear at all when an FM
broadcast is received normally, press the FM MODE
button to display the STEREO indication.
Preset tuning
After you have tuned in stations using automatic
tuning or manual tuning, you can preset them to
the receiver. You can then tune in any of the
preset stations directly. Up to 30 FM or AM
stations can be preset. The receiver also scans all
the stations that you have preset.
Before tuning in preset stations, be sure to preset
them by performing “Presetting radio stations”.
Presetting radio stations
1 Press the FM or AM button repeatedly
to select the FM or AM band.
You can also use INPUT SELECTOR on
the system. The last station received is
tuned in.
2 Tune in the station that you want to
preset using automatic tuning or
manual tuning (page 37).
3 Press the MEMORY button.
MEMORY appears on the display for a few
seconds.
Perform steps 4 to 5 before MEMORY
disappears.
4 Press the SHIFT button to select the
memory page and press the PRESET
CH/ALBUM + or PRESET CH/
ALBUM – button to select a preset
number.
If MEMORY disappears before you press
the preset number, return to step 3.
5 Press the MEMORY button again to
store the station.
If MEMORY disappears before you can
store the station, return to step 3.
6 Repeat steps 2 to 5 to preset another
station.
Tuning in preset stations
1 Press the FM or AM button repeatedly
to select the FM or AM band.
You can also use INPUT SELECTOR on
the system. The last station received is
tuned in.
2 Press the PRESET CH/ALBUM + or
PRESET CH/ALBUM – button
repeatedly to select the preset station
that you want.
Each time that you press the button, the
receiver tunes in one preset station at a time,
in the corresponding order and direction as
follows:
Tips
• In step 2, press the SHIFT button to select a memory
page (A, B, or C).
• You can also use the PRESET TUNING +/– buttons
on the receiver to tune in preset stations.
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T