Filter
Top Products
Praparations
masterpage:Right
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB06_STR-LV700-CEL.fm]
35
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
Depending on the environment in which you are using Network Media, use the following procedure to
select the method of acquiring an IP address for the receiver.
1 Press the blue MAIN MENU button.
The main menu appears.
2 Select Settings, and press the SELECT button.
The Settings screen appears.
3 Use / to select System Settings, and then press the SELECT button.
The System Settings screen appears.
4 Use / to select IP Address, and then press the SELECT button.
The IP Address screen appears.
5 Use / to select the item appropriate to the environment in which you are using
Network Media, and then press the SELECT button.
• When using Network Media with a router
c Select Obtain an IP address automatically (using router).
• When using this function without a router
c Select Obtain an IP address automatically (not using router).
6 Use / / / to select OK, and then press the SELECT button.
Tip
To set the receiver IP address, see page 77.
Step 6: Setting the receiver IP address acquisition method
///
SELECT
Settings
IP Address
Current Settings:
OK
Obtain an IP address automatically (using router)
Obtain an IP address automatically (not using router)
IP Address:
Subnet Mask:
000
000
.
.
000
000
.
.
000
000
.
.
000
000
Specify an IP address
SELECT
:Select
RETURN
:Return
CANCEL