Filter
Top Products
Using the receiver
masterpage:Right
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB07_STR-LV700-CEL.fm]
47
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
— Miscellaneous operations and settings
This section describes other operations and settings possible with the receiver.
You can change the audio input mode of
components for which this receiver has digital
audio input jacks.
1 Press INPUT SELECTOR to select
the input.
2 Press the INPUT MODE button
repeatedly to select the audio input
mode.
The selected audio input mode appears on
the display.
Audio input modes
• AUTO IN
Gives priority to the digital audio signal and
specifies analogue audio signal input to the
AUDIO IN (L/R) jacks when there is no
digital audio signal.
• OPT IN
Specifies the digital audio signal input to the
DIGITAL OPTICAL input jacks.
• COAX IN
Specifies the digital audio signal input to the
DIGITAL COAXIAL input jack.
• ANALOG
Specifies the analogue audio signal input to
the AUDIO IN (L/R) jacks.
Lets you specify the input mode for the digital
signal input to the digital input jacks.
1 Press the black MAIN MENU button
repeatedly until SET UP appears on
the display.
2 Press / to select to select DEC.
XXXX.
3 Press / to select the setting that
you want.
Digital audio input decoding
priority
• AUTO
Automatically changes the input mode
between DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent
interruptions when playback starts). Even
when other signals are input, the sound is
output. When set to AUTO and the sound
from the digital audio jacks (for CD, etc.) is
interrupted when playback starts, set to PCM.
Changing the audio input
mode of digital
components
— INPUT MODE
Selecting the digital audio
input decoding priority