Filter
Top Products
masterpage:Left
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB07_STR-LV700-CEL.fm]
42
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
— Enjoying surround sound
This section describes how to obtain the best possible sound quality from your system.
In this mode, the receiver outputs the sound
from the front left and right speakers only. There
is no sound from the subwoofer.
Listening to 2-channel stereo
sources (2CH STEREO)
Standard 2-channel stereo sources completely
bypass the sound field processing and multi-
channel surround formats are downmixed to 2
channels.
Press the 2CH button on the remote.
2CH ST. appears on the display and the receiver
switches to the 2CH STEREO mode.
Notes
• You can also use the SOUND FIELD button to
perform this operation.
• No sound is output from the subwoofer in the 2CH
STEREO mode. To listen to the 2-channel stereo
sources using the front left and right speakers, and a
subwoofer, set to A.F.D. AUTO.
The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode that you want
for your audio sound.
Decoding the input audio
signal automatically
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2-channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the subwoofer.
Using only the front
speakers
2CH
Enjoying higher fidelity
sound
— AUTO FORMAT DIRECT
A.F.D. mode
(display)
Decoding mode
A.F.D. AUTO
(A.F.D. AUTO)
As encoded
PRO LOGIC
(DOLBY PL)
Dolby Pro Logic
PRO LOGIC II MOVIE
(PLII MOV)
Dolby Pro Logic II
PRO LOGIC II MUSIC
(PLII MUS)
A.F.D.