Sony DTC-690 Cassette Player User Manual


 
5
)
7£8
$›
•‡
0
4
28
5
3
1
6
7
9
10
-ON STANDBY
POWER
REC OFF PLAY
TIMER
OPEN/CLOSE
PHONES LEVEL
O1O
AUTO
START ID
WRITE ERASERENUMBER
PAUSE
ERASEWRITE ERASEWRITE
SKIP ID END ID
AMS
INPUT
REC
MODE
COUNTER MODE
LONG
ANALOG OPT COAXIAL
REC LEVEL
REC MUTE REC
L R
STANDARD
Refer to the pages indicated in parenthesis
for details.
Front Panel/Remote
Commander Å
1 POWER button
Turns the power on and off.
2 TIMER switch
Normally set to the OFF position. When
recording or playing back at the desired
time using a commercially available
audio timer, set to the REC position or
the PLAY position respectively. (51)
3 Cassette compartment
Insert a cassette with the window side
up and the safety tab facing you. (18)
4 START ID buttons
AUTO: Press to turn on and off the
AUTO indicator. When the AUTO
indicator is lit, the start ID will
automatically be written during
recording. When the AUTO indicator
is not lit, press the START ID WRITE
button at the point where you want to
write a start ID. (30)
WRITE: Press to write the start ID at the
desired point during recording or
playback. (31)
ERASE: Press to erase a start ID. When
a start ID and a program number are
written on the tape, both codes are
simultaneously erased by pressing
this button. (33)
RENUMBER: Press to renumber all
programs on the tape. When only the
start IDs are written, pressing this
button will insert the proper program
numbers beginning with “1”. The
tape will rewind and start from the
beginning to accomplish this
function. (36)
5 Display window
6 SKIP ID buttons
WRITE: Press at the beginning of the
portion you may wish to skip later.
A skip ID will be written from the
point where you pressed this button.
(38)
ERASE: Press to erase the nearest skip
ID which is before the current
position. (39)
A
5
1
2
3
4
6
Location and
Function of Controls