Filter
Top Products
38
The skip ID indicates the beginning of the
portion to be skipped.
When the skip ID is detected during
playback, the tape skips to the next start ID
position, and the normal playback
resumes. (SKIP play) (Page 28.)
You can write the skip ID during recording
or write more accurately during playback.
Writing during Recording
Press the SKIP ID WRITE button at the
beginning of the portion you want to
skip later.
The SKIP ID and WRITE indicators light
momentarily.
The skip ID is written for about 1 second (2
seconds in the long-play mode) from where
you pressed the button.
Writing during Playback
(Rehearsal Function)
During playback, skip ID can be written at
the desired position more accurately than
during recording. Make sure that the
safety tab of the cassette is closed.
1 During playback, press the SKIP ID
WRITE button at the desired
position.
The REHEARSAL indicator lights and
the WRITE indicator flashes, and the
portion for 3 seconds to the point
where you pressed the SKIP ID
WRITE button, is played back
repeatedly (rehearsal function).
The end of the repeated portion will
be the beginning of the skip ID.
2 Press the
11
11
1 or
¡¡
¡¡
¡ button to
adjust the “repeat end” point.
The “repeat end” point shifted
backward with the 1 button or
forward with the ¡ button by 0.3 of
a second.
The indicator at the MARGIN shows
how much the “repeat end” point is
shifted from the point where you
pressed SKIP ID WRITE.
a) When you pressed 1 twice.
3 After setting the beginning of the
skip ID at the desired point, press
the SKIP ID WRITE button again.
The SKIP ID indicator lights, and the
skip ID is written.
)
8
1¡$›
•¶
£7
Skip ID
1
2
2
1, 3
WRITE
SKIP ID
3
WRITE
SKIP ID
REHEARSAL
START ID
SKIP ID
S
END ID
WRITE
a)
1
¡