Sony DTC-690 Cassette Player User Manual


 
13
ABS TIME
REHEARSAL
REPEAT 1
ALL
DIGITAL IN
SKIP ID
START ID
START ID
SHIFT AUTO
RENUMBER
WRITE ERASE
SKIP ID
WRITE ERASE
L
R
– dB 60 OVER
OPTICAL
COAXIAL
32 KHZ
44.1 KHZ
48 KHZ
DISPLAY
OFF AUTO
H
S
S
dB
M
40 20 8 6 430 2 0
MARGIN
REMAINING
RMS AMS
CAUTION STEP
PGM NO.
MUSIC SCAN
SKIP
END ID
WRITE ERASE
REC LONG
12
e Sampling frequency indicator
48 kHz: Lights when recording or
playing back analog input signals
(standard mode).
44.1 kHz: Lights when recording or
playing back a CD or a pre-recorded
DAT cassette tape.
32 kHz: Lights when recording or
playing back analog input signals
(long-play mode).
r START ID indicator
Flashes when writing (for 9 or 18
seconds) or erasing a start ID code,
and lights when the start ID is detected
during playback.
SKIP ID indicator
Lights when writing (for 1 or 2 seconds)
or erasing a skip ID code or when the
skip ID is detected during playback.
t SKIP ID mode indicator
WRITE: Lights when writing the skip ID.
ERASE: Lights when erasing the skip ID.
y END ID mode indicator
WRITE: Lights when writing the end ID.
ERASE: Lights when erasing the end ID.
u MARGIN indicator
Shows how much margin there is
between the peak level of input audio
signal and 0 dB.
i REHEARSAL indicator
Lights while the rehearsal function is
activated (32).
o Peak level meters
Indicate the signal levels during
playback and recording. There are
separate meters for each left and right
channel. These meters have a peak
hold function which indicates the peak
level momentarily.
o
i
e
r
t
y
u
D
Location and
Function of Controls