Sony DTC-690 Cassette Player User Manual


 
14
R
DIGITAL IN/OUT
OPTICAL
LINE IN
L
IN OUTIN
COAXIAL
R
LINE OUT
L
Rear Panel Jacks
1 LINE IN (line input) jacks (phono jack)
Connect to the recording outputs of an
amplifier. Signals supplied by the
amplifier can be recorded using the
sampling frequency of 48 kHz in the
standard play mode or 32 kHz in the
long play mode.
2 LINE OUT (line output) jacks (phono
jack)
Connect to the DAT or tape inputs of an
amplifier. The playback signal of this
deck will be output.
3 COAXIAL/OPTICAL DIGITAL IN (digital
input) jacks (coaxial phono jack/optical
jack)
Connect to the digital outputs of an
amplifier having a built-in D/A converter
or other digital source, such as a CD
player for digital-to-digital recording.
4 OPTICAL DIGITAL OUT (digital output)
jack (optical jack)
Connect to the digital inputs of an
amplifier having a built-in D/A converter
or another DAT deck, for playback of a
DAT cassette or digital-to-digital
recording.
Notes on connection
Use the connecting cords specified in
the illustrations.
Turn off the power for all equipments
before making connections.
Be sure to insert the plugs firmly into the
jacks. Loose connections may cause
hum and noise. When unplugging, grasp
the plug and not the cord.
Note on sound signals
When connecting an optical cable to the
DIGITAL IN/DIGITAL OUT jacks, sound
signals (L/R) are transmitted together
through the cable.
E
1
2
3 4
Location and
Function of Controls