Filter
Top Products
26
48 KHZ
S
M
PGM NO.
AMS
End Search
If the previous recording was applied to the
middle of the tape, you must locate exactly
the last point of the recorded area, and
start the new recording from this point. This
will prevent leaving a blank section on the
tape.
If you want space between the last
recording and the new recording, use the
•REC MUTE button to mute the sound.
Press ¡.
The last point of the previous recording
(the beginning of the blank section or the
beginning of the end ID*) is located, and
the tape stops. When the end ID is
detected, the "EE" indicator lights at the
PGM. NO display.
When new recording is made from the
position where the end ID is written, the
end ID is erased automatically.
Note
If the point where you pressed the ¡
button is blank, the end search operation
will not function.
When the end ID is written before a
blank section Ç
The end search operation stops at the
beginning of this end ID as described in
Fig Ç.
A)Selection
B)Blank
C)The position at which the end ID stops.
D)End ID
Note on the duration of a blank
section
The blank section must last for more than 9
seconds for the end search operation to
function correctly.
With the new cassette tape which no
recording is made, the tape will advance to
the end.
Recording
¡
¡1
•
5
5
D
A
AA
B
C
C
)
8
1¡$›
•¶
£7
Lights