Sony DTC-690 Cassette Player User Manual


 
39
Note on the point where a skip ID is
written Å
During the rehearsal function, a skip ID will
be written at the end of the repeated
portion as illustrated.
a) Repeated portion
b)Point where you pressed SKIP ID WRITE
c) Selection
d)3 seconds
e) Skip ID (1second)
f) Each time you press ¡
g)0.3 sec.
h)Each time you press 1
Normally, the repeated portion is played
back 5 times.
When the 1 or ¡ button is pressed
while the repeated portion is played back,
the repeated portion is played back up to 8
times, and then the tape stops.
Erasing
Make sure that the safety tab of the
cassette is closed.
During playback or in the stop mode,
press the SKIP ID ERASE button
immediately after the skip ID to be
erased (immediately after the SKIP ID
indicator appears).
The tape is rewound to the nearest skip ID
position and the skip ID is erased.
The ERASE indicator lights while the skip ID
is being searched for and goes off when
the skip ID is erased.
Precaution
When the skip ID and the start ID are
overwritten, the skip ID will also be erased
if the start ID is erased.
Skip ID
ID to be erased
Start ID, skip ID
Skip ID
Operation
Press the START ID
ERASE button.
Press the SKIP ID
ERASE button.
c)
d)
b)
a)
c)
e)
g)
g)
h)
f)
A
)
8
$›
•¶
£7
ERASE
SKIP ID
SKIP ID ERASE
START ID
SKIP ID
END ID
ERASE