Filter
Top Products
47
Music Scan
With the this function, you can listen to the
first part of each selection.
You can designate the scan time up to 15
seconds in steps of a second. The scan
time is 8 seconds if the scan time is not
desingated. (The designated time remains
memorized even if you turn off the unit.)
For this operation, the start ID codes must
be written on the tape. For how to write the
start ID codes, see page 30.
This operation can be performed only with
the remote commander.
1 In the stop mode*, press the MUSIC
SCAN button.
The MUSIC SCAN indicator flashes
and the designated scan time is
indicated at the MARGIN display.
To designate the scan time, press the
1 or ¡ button while the scan time
is indicated at the MARGIN display.
2 Press the
33
33
3 (play) button.
The tape is rewound to the beginning,
the first part of each selection (start
ID position) is played back for the
time you designated sequentially.
The 3 and START ID indicators light
during playback.
When you press the 4/¢ button
instead of the 3 (play) button
The nearest start ID before/after the
current position is detected and, after
playing back the first part of that
selection for the time you designated,
the next start ID in the reverse/
forward direction is located.
This operation continues until the end
of the tape.
* When the MUSIC SCAN is pressed
during playback, the tape is rewound to
the beginning and the music scan starts
automatically.
1
1
2
MUSIC
SCAN
S
MARGIN
MUSIC SCAN
2
3
Various Playback
Operations