Sony DTC-690 Cassette Player User Manual


 
49
Skip Play
With this function, you can skip the
undesired selection which the skip ID is
written and listen to the only desired one.
For this operation, the skip ID code(s) must
be written on the tape.
Press the SKIP PLAY button.
The SKIP indicator lights.
During playback, the tape skips to the next
start ID position automatically when a skip
ID is detected, and the playback resumes.
To release the SKIP play mode
Press the SKIP PLAY button to turn off the
SKIP indicator.
Auto Play: Restarting Playback
after Rewinding
While pressing the 1 button, press the 3
button.
The tape is rewound to the beginning, and
playback starts automatically.
Notes
If the above operation is done
immediately after the cassette is
inserted, the auto play operation does
not function. In this case, press the 3
button a few seconds after the 1
button is pressed.
The setting of the skip play and repeat
play remains even if the power is turned
on/off.
SKIP
PLAY
SKIP PLAY
Various Playback
Operations