Filter
Top Products
10
Display Window Ç
To turn off the display window
When the power is turned on, the display
window also is turned on. During recording
or playback, all display or some parts of
the display can be turned off as follows:
This operation can be performed only with
the remote commander.
Each time you press the DISPLAY MODE
button, the display changes as follows:
Normal indicators (a)
Peak level meters and margin indicators
go off. (b)
(The DISPLAY OFF indicator lights.)
All the indicators go off during recording
or playback*. (c)
(The DISPLAY OFF AUTO indicator lights
momentarily just before the indicators go
off.)
* When pressing the DISPLAY MODE
button except during recording or
playback, the DISPLAY OFF AUTO
indicator lights. In this case, all the
indicators go off immediately after
recording or playback starts.
To change the brightness of the
display window
While pressing the COUNTER MODE
button, press one of the numeric buttons 1,
2 and 3 on the remote commander. The
greater number pressed, the darker the
display window becomes.
∞
∞
C
ABS TIME
START ID
SKIP ID
L
R
– dB 60 OVER
S
dB
M
40 20 8 6 430 2 0
MARGIN
END ID
12
AUTO
PGM NO.
48 KHZ
ABS TIME
START ID
SKIP ID
DISPLAY
OFF
S
M
END ID
AUTO
PGM NO.
48 KHZ
«
«
DISPLAY
OFF AUTO
(a)
(b)
(c)
2
Location and
Function of Controls