Sony CMT-SE9 Stereo System User Manual


 
Timer
73
GB
9 Set the time to start playing.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press
. or > repeatedly to set the
minute, then press ENTER.
10 Set the time to stop playing following
the same procedure as step 7 to 9.
11 Press . or > repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
12 Press ENTER.
The timer settings appear, then the original
display returns.
13 Press ?/1 to turn off the system.
Other operations
Notes
If you use the Play Timer and the recording timer at
the same time, the recording timer has priority.
If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
The system turns on 30 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
If the system is on 30 seconds before the preset time,
the Play Timer will not be activated.
You cannot use the optional component connected to
VIDEO/SAT IN or VIDEO/SAT DIGITAL IN
OPTICAL jacks as the sound source for Play Timer.
To Do this
Check the setting/
active the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “TIMER
SELECT?” appears, then
press ENTER.
3 Press . or >
repeatedly until “PLAY
ON?” appears, then press
ENTER.
Change the setting Start over from step 1.
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “TIMER
OFF?” appears, then press
ENTER.
t TUNER y DVD PLAY T
t TAPE PLAY y MD PLAY T