Filter
Top Products
16
GB
Notes
• If DVD playback is paused for approximately one
hour, the system automatically turns off.
• 2 channel sound is heard when using headphones.
• You cannot change the play mode during play.
• When you change the function, DVD indicator may
appear even if you do not load the disc.
• Some time may be needed to start playback of discs
recorded in complex configurations such as many
layers.
• This system can play Multi Session CDs when an
MP3 audio track is located in the first session. Any
subsequent MP3 audio tracks, recorded in the later
sessions, can also be played back.
• Maximum number of albums on a disc: 99 (The
maximum number of MP3 audio tracks that can be
contained on an album is 250.)
• An album that does not include an MP3 audio track
is skipped.
• If you put the extension “.MP3” to data not in MP3
format, the system cannot recognize the data
properly and will generate a loud noise which could
damage your speaker system.
• The system can play to a depth of 8 directories.
• When playing a VBR (Variable Bit Rate) MP3 disc,
the displayed playing time may differ from the actual
time.
Tip
When playing the data disc (CD-ROM/CD-R/
CD-RW) contained MP3 audio tracks and JPEG image
files, set to “MP3” in “DATA CD PRIORITY”
(page 27).
Resuming playback from the
point you stopped the disc
— Resume Play
This system memorizes the point where you
stopped the disc so you can resume from that
point. Resume Play is not cancelled when you
set Power Saving Mode.
1 While playing a disc, press x to stop
playback.
“RESUME” appears in the display. If
“RESUME” does not appear, Resume Play
is not available.
2 Press SA-CD/DVD N.
The player starts playback from the point
you stopped the disc in step 1.
Notes
• You cannot perform Resume Play during Shuffle
Play or Program Play.
• Depending on where you stopped the disc, the
system may resume playback from a different point.
• Resume play is cancelled when:
– you press x in stop mode.
– you disconnect the mains lead.
– you remove a disc.
– you change the play mode.
– you change the settings using the DVD SETUP
button.
Playing a track by entering the
track number
Press the number button(s) to enter the track
number of the track you want to play during
Normal Play, then press ENTER to play the
track. (To enter the MP3 audio track number,
press ALBUM + or – repeatedly to select the
desired album before entering the number.)
To enter a track number over 10
1 Enter the corresponding digits.
To enter 0, press 10/0.
2 Press ENTER.
Example:
To play track number 30, press 3 and 10/0, then press
ENTER.
To play MP3 track number 100, press 1, 10/0 and
10/0, then press ENTER.