Filter
Top Products
MD – Editing
55
GB
Releasing all groups on an MD
— All Release Function
You can release all groups on an MD at once.
1 Press MD GROUP repeatedly in stop
mode until “GROUP ON” appears.
2 Press MENU/NO.
3 Press . or > repeatedly until “Gp
All REL?” appears, then press ENTER.
“All REL??” appears.
4 Press ENTER.
The MD deck lets you erase unwanted tracks
quickly and easily.
You can restore the erased contents using the
Undo function immediately after the erasing
(page 60). However, you cannot restore the
erased contents after performing other editing.
Before erasing, make sure if it is all right to erase
the content.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
When you erase a track, the total number of
tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
Example: Erasing track 2
As the track numbers are renumbered as above,
it is recommended to erase from the latter tracks
when erasing several tracks, so as not to change
the track numbering of unerased tracks.
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO.
3 Press . or > repeatedly until “Tr
Erase?” appears, then press ENTER.
Playback of the selected track starts.
Erasing recordings
— Erase Function
123
123
4
ACD
AC D
B
Erase track 2
Track number
Original
tracks
After
ERASE
continued